Maintenance is a must…

My grandfather lived his entire life in cold weather states. He was born in Minnesota, the land of 10,000 often frozen lakes, then moved to Michigan, the Great Often Frozen Lakes State. Yet in all his years, he never went ice fishing.

He just never cared for the sport, he’d tell me the fish would still be there when the weather warmed up. So, when I would visit him and grandma on their farm during the snowy months, we never went fishing, but that didn’t mean we didn’t do things related to the sport.

We would often go out to his work room where he’d fire up the propane gas heater then pull out all his rods and reels so we could clean and oil them. He taught me that reels can often seize up when left sitting without proper maintenance. This could be caused by a build up of corrosion or just plain dirt. Maintaining his tackle was something he did when the weather grew too cold to fish.

Flash forward 60 years and I am now living in Southern California where the seasons usually run together unnoticed. In a climate like this where you can fish all year round, it is easy to forget this lesson and that is just what I did. I had not been out for about two months since the Pacific Ocean is pretty cold now, which puts off the fishing, so a few days ago when the air temperature was in the mid-seventies (in February no less), I decided to head out to the Ventura Pier just to get out of the house. Which is good because I didn’t get much fishing done while I was there.

The spool release lever on my Shakespeare ATS Trolling Reel was frozen in place even though I knew it was fine the last time I went out. Nothing I could do while on the pier would make it work, so I had to set it aside which meant no bottom fishing that day. So, I baited up my Shakespeare Contender Spinning Reel to do some fishing over the side but the bell stop lever was not working. I could still fish with it and watch to make sure the line didn’t snag up into a tangled mess while reeling in but after a half hour of this, I decided to go in for the day. When I got home, I immediately took both reels apart on my work bench. A liberal dose of Liquid Wrench Super Lubricant freed the balky release lever on my Shakespeare ATS Trolling Reel after it sat for an hour to let the oil do its work. While it was apart, every part of it got oiled as well.

The problem with the Shakespeare Contender Spinning Reel was a little more difficult to diagnose but what it came down to was a build up of dirt and corrosion that kept the bell stop lever from seating properly. A little work with an ice pick, that once belonged to grandpa, dug the build up out of the way so the reel would work as designed. It also got a liberal dose of Liquid Wrench.

When the work on these two rigs was completed, it took my other two rigs apart and cleaned and oiled them, too.

I didn’t want to get stuck again.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: